Italiano
Italiano
English
English
Deutsch
Deutsch


Powder coating

 
   

Powder coating is used to increase resistance against various external agents (e.g. heat, humidity, abrasion, mechanical impacts or chemical agents).

Powder is directed onto the pieces inducting electrostatic charges and reduce overspray to a minimum. There is a great variety of powders as to obtainable results, generally speaking they are epoxy-based, acrilic, PES, PUR or Nylon.

Filtration in this application has to evaluate the following specific parameters:

  • air charged with medium/low volumes of powder with medium/fine particle size
  • presence of electric and electrostatic charges, possible risk of fire/explosion
  •  
    Products we recommend:
    01
    149x96 H1200 in PES
    02
    153x91 H1200 in PES
    04
    C325 in cellulose
    05
    C325 in PES (white, teflon), PP
    06
    C325 in Meltblown
    07
    C325 in PES alluminated/ conductive
    08
    C335 in PES (white, teflon), PP
    09
    C335 in Meltblown
    10
    C350 in cellulose
    11
    C350 in PES (white, teflon), PP
    12
    C350 in PES alluminated/ conductive
    13
    C355 in PES (white, teflon), PP
    14
    C355 in Meltblown
    15
    F212 in PES (white, teflon, alluminated/conductive)
    16
    F212 in PP
    17
    F264 in PES (white, teflon, alluminated/conductive)
    18
    F264 in PP
    19
    F264 in Meltblown
    20
    F268 in PES (white, teflon, alluminated/conductive), PP
    21
    F390 in PES (white, teflon, alluminated/conductive), PP
    22
    181 conical H1000 in PES
    23
    ø115 screw-type in cellulose
    24
    ø120 screw-type in cellulose
       
    Accessories:
    30
    Rotating cleaning system
    31
    External venturi tubes
    32
    Internal venturi tubes reinforcement cages
    33
    Flat/pleated cells smooth/rigid pocket filters
    34
    Rigid pockets Turbogas high efficiency pockets/panels